ECU / TCU calibration
Engine and transmission calibration tailored to your vehicle’s setup and the way you drive.
- Stage 1, Stage 2 and custom projects
- TCU calibration
- Review of existing modifications
Automotive electronics
Electronics.
Precision.
Possibilities.
Automotive electronics · mail-in ECU/TCU services · online file processing for workshops.
Diagnostics, control unit repairs and custom ECU / TCU calibration. Visit us with your vehicle, send in a control unit or use our online tuning file service.
ECU unlocking with Boot Glitch · Bosch MD1/MG1€195 · View service ↗Cars and commercial vehiclesSupport for workshops
OMESA / ENGINEERINGECU + TCU
01 / DiagnosticsFind the cause
02 / ElectronicsRepair and adaptation
03 / CalibrationSoftware
ECU / TCU · repair and tuningCoding · modules and adaptationsUSA → EU · conversions and infotainmentFILE LAB · online tuning files
Our work
See our work in action.
Explore project photos, details of our work and updates on our two Facebook pages.
Our services
From diagnosis
to the right solution.
We start with your vehicle, its control unit and the problem you need to solve.
ECU repair and cloning
Electronic fault diagnosis, data recovery and data transfer between compatible control units.
- Circuit-level control unit repairs
- Data reading and transfer
- Mail-in service
Diagnostics and coding
Diagnosis of vehicle electronics, module communication and configuration issues.
- Coding and adaptations
- Configuration after module replacement
- Vehicle wiring diagnostics
Conversions and infotainment
European configuration for supported US-market vehicles and infotainment systems.
- Measurement units and regional settings
- Polish-language support and updates
- Equipment configuration
Trucks and machinery
Electronics and software services for commercial vehicles and agricultural machinery.
- ECU and module diagnostics
- Bench / Boot / OBD reading
- Scope assessed for each project
Online tuning file service
Upload your reads, choose the required modifications and manage all order communication in one place.
- ECU and TCU files
- Order history and status
- Portal available in Polish and English
For workshops and tuning professionals
Your original file.
Our calibration.
One portal.
OMESA FILE LAB keeps the entire workflow in one place, from uploading the original read to receiving your modified file and discussing the order.
Open OMESA FILE LAB ↗01
Upload the original readAdd the vehicle details and control unit identification.
02
Choose the required servicesCheck the cost of your selected options before placing an order.
03
Track progress and download your fileMessages and files stay together with the order.
ECU and TCU file services for your workshop
Check what to send, how to order and which information we need for your vehicle.
Now in our workshop: Bosch MD1/MG1 ECU unlocking by BOOT GLITCH€195 for unlocking a supported ECU; control-unit handling included · Shipping arranged separately · View service ↗Pricing / OMESA FILE LAB
File-processing prices through the OMESA FILE LAB portal
These prices cover file processing ordered through the OMESA FILE LAB portal. Work performed on your vehicle at our workshop is quoted individually.
Send a file
Catalogue pricesUpload your read file and choose the services. Catalogue prices and package rules apply.
Send a control unit
Catalogue + €70For file work on a mailed ECU, catalogue prices plus a handling charge apply. Boot Glitch at €195 already includes handling — additional functions are charged at catalogue file-processing prices, without another €70 handling charge.
Bring your vehicle
Individual quoteThe price is agreed individually because vehicle service includes measurements and diagnostics.
BOOT GLITCH
Bosch MD1/MG1 ECU unlocking by BOOT GLITCH
For an ECU on the supported list. The control-unit handling charge is included in the Boot Glitch price. Additional functions are charged only at catalogue file-processing prices, without a second handling charge. Shipping costs are agreed separately.
€195View service ↗
Passenger cars
With Stage or Eco Tuning, ecology additions cost their regular sum, capped at €50. A cheaper single addition keeps its regular price.
| Service | Price |
|---|---|
| Stage 1 | €70 |
| Stage 1+ | €100 |
| Stage 2 | €120 |
| Stage 3 | €220 |
| Eco tuning | €70 |
| Torque / power limit | €50 |
| Flex fuel / E85 | €170 |
| DPF / FAP OFF | €50 |
| EGR OFF | €40 |
| AdBlue / SCR OFF | €70 |
| NOx OFF | €60 |
| CAT / Decat | €50 |
| GPF / OPF OFF | €60 |
| Lambda / O2 OFF | €40 |
| EVAP OFF | €40 |
| Swirl flaps OFF | €40 |
| TVA / throttle valve OFF | €40 |
| Exhaust flap | €40 |
| Vmax OFF | €30 |
| Rev limiter | €50 |
| Hardcut / popcorn | €60 |
| Pops & Bangs | €70 |
| Launch control | €70 |
| Anti-lag | €150 |
| Cold start OFF | €40 |
| Start/Stop OFF | €40 |
| Hot start fix | €40 |
| Fan temperature | €40 |
| Sport display | €60 |
| Cylinder deactivation OFF | €60 |
| DTC OFF — per fault code | €20 |
| Checksum / file verification | €30 |
| ORI recovery | €50 |
| Repair a bad MOD | €70 |
| Clone / data transfer | €70 |
| Virgin / reset | €70 |
| IMMO / synchronisation | €70 |
| TCU Stage 1 | €90 |
| TCU Stage 2 | €120 |
| TCU torque limiters | €60 |
| Clutch pressure | €70 |
| Shift points | €70 |
| Shift speed | €70 |
| Kickdown OFF in manual mode | €50 |
| Auto upshift OFF in manual mode | €50 |
| Starting gear / launch | €60 |
Vans
With Stage or Eco Tuning, ecology additions cost their regular sum, capped at €50. A cheaper single addition keeps its regular price.
| Service | Price |
|---|---|
| Stage 1 | €70 |
| Eco tuning | €70 |
| Torque / power limit | €50 |
| DPF / FAP OFF | €50 |
| EGR OFF | €40 |
| AdBlue / SCR OFF | €70 |
| NOx OFF | €60 |
| Lambda / O2 OFF | €40 |
| Swirl flaps OFF | €40 |
| TVA / throttle valve OFF | €40 |
| Vmax OFF | €30 |
| Cold start OFF | €40 |
| Start/Stop OFF | €40 |
| Hot start fix | €40 |
| DTC OFF — per fault code | €20 |
| Checksum / file verification | €30 |
| ORI recovery | €50 |
| Repair a bad MOD | €70 |
| Clone / data transfer | €70 |
| Virgin / reset | €70 |
| IMMO / synchronisation | €70 |
Motorcycles, ATVs & UTVs
With Stage or Eco Tuning, ecology additions cost their regular sum, capped at €50. A cheaper single addition keeps its regular price.
| Service | Price |
|---|---|
| Stage 1 | €70 |
| Stage 1+ | €100 |
| Stage 2 | €120 |
| Stage 3 | €220 |
| Eco tuning | €70 |
| Lambda / O2 OFF | €40 |
Trucks & buses
With Stage or Eco Tuning, ecology additions cost their regular sum, capped at €50. A cheaper single addition keeps its regular price.
| Service | Price |
|---|---|
| Stage 1 | €120 |
| Eco tuning | €120 |
| DPF / FAP OFF | €100 |
| EGR OFF | €100 |
| AdBlue / SCR OFF | €150 |
| NOx OFF | €150 |
| Lambda / O2 OFF | €100 |
| Checksum / file verification | €30 |
| ORI recovery | €120 |
| Repair a bad MOD | €180 |
Agricultural & construction machinery
Stage 1 or Eco Tuning with ecology: up to €250 in total. Ecology alone: up to €250. A lower sum of selected services stays lower.
| Service | Price |
|---|---|
| Stage 1 | €150 |
| Eco tuning | €150 |
| DPF / FAP OFF | €200 |
| EGR OFF | €120 |
| AdBlue / SCR OFF | €200 |
| NOx OFF | €150 |
Marine
| Service | Price |
|---|---|
| Stage 1 | €150 |
| Eco tuning | €150 |
Other services
Individually quoted after you send an inquiry.
Send an inquiry ↗Availability is confirmed using the control unit identification and file analysis.
Order a file service ↗OMESA wallet
Top up your wallet.
Order your file service.
Choose your services and upload your file. See the full order price before you pay.
- Top up your wallet
- Upload your file
- Download your finished file
From your order to the processed file. Everything in one portal.
Convenient payments
- Card
Revolut Pay
Apple Pay on supported devices.
OMESA Tuning
Specialists in electronics.
Flexible ways to work with us.
We work on the electronics of cars, vans, trucks and machinery. Our focus is control units, diagnostics, module configuration and vehicle software.
Bringing a vehicle?
Vehicle service includes measurements and diagnostics. The price is agreed individually for the required work.
Get in touchSending a control unit?
Send us the module identification and a description of the fault before shipping. We will confirm whether we can help and agree the shipping details.
Arrange shippingHave an original read?
Use OMESA FILE LAB. Include the original file, ECU/TCU identification and a description of the required changes.
Explore the portalBefore you get in touch
Frequently asked questions.
What information do you need for a quote?
The make, model, year, engine and a description of the fault or required work. Include any diagnostic reports or control unit identification you already have.
Does the file price include work on the vehicle?
FILE LAB prices apply to the file you provide. Work on the complete vehicle is quoted individually because it includes measurements and diagnostics.
Can I send a control unit by courier?
Yes, after arranging shipment. File-service prices apply, plus the control-unit handling charge shown in the price list.
Can you review an existing tune?
We can assess the scope of a review once we have the control unit identification, available files and a description of the symptoms. If you have a copy of the original read, keep it and include it with your enquiry.
Tell us about your project
Your vehicle, control unit
or tuning file?
+48 795 656 114 ↗Visits and shipments by prior arrangement.
Opening hours
Monday–Friday: 09:00–18:00
Saturday: 10:00–13:00
Send an inquiry
Let’s discuss the work you need.
Tell us about your vehicle and how we can help.